Home Prodotto Misuratore di opacità LDM-100

Misuratore di opacità LDM-100

LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.

Download e risorse

Panoramica del prodotto

LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.

Principio

LDM-100 adopts Laser Transmission Method to measure the dust concentration. The basalprinciple (refer to Figure 1.1)is using diode laser as the lamp-house. After the detecaser beams passing through the spectroscope, the reflected liaht is detected by thedetector and forms referenced sianals, Transmission light shines to the reflecting materiathrough the measured environment with dust, After the refected liaht traverses themeasured environment again, it is detected by detector and forms measuring sianals.According to the contrast of referenced sianals and measuring sianals, transmittanceinformation caused by dust is obtained.

Misuratore di opacità LDM-100 Specifiche tecniche

Parametri	Gamma	Dettagli Transmittance: (0~100)%, (80~100)% Turbidity: (100~0)%~(20~0)% Extinction: (0~2.5)~(0~0.1) Measurement concentration: (0~5000) mg/m³ (Concentration is correlative with optical path length, it could be customized base on requirement)
Parametri	Precisione	Transmittance/Turbidity: ± 1% Extinction: ± 0.002
Optical path length	(0.5~15)m	-
Flue Temperature	(-20~600)°C	-
Flue Pressure	Instrument Air Purging: (-20~50)kPa Purging Fan: (-10~8)kPa	-
Specifications	Response: (1~600)s (setting is available) Display Error: ≤ ± 1%F.S. Repetition: ≤ ± 1%F.S. Span Drift: ≤ ± 2%F.S. Enclosure Protection: IP 65	-
Interface Signals	Analogue Output: 2-channel (4~20)mA; Max: 500Ω Digital Output: RS485/GPRS Relay Output: 3-channel output (24V, 1A)	-
Conditions	Power Supply: Measuring Unit: 24V DC <20W Purging Unit: 220 V AC <400W	-
Conditions	Ambient Temperature: (-10~50)°C	-
Installazione	Installation: In-situ	-

Applicazioni versatili in tutti i settori industriali

The cement, the thermal power, the iron and steel, the metallurgy, the refinery, the aluminum, the petrochemical, the papermaking, the glass industry, and so on.

Caratteristiche principali di Misuratore di opacità LDM-100

Adopts laser transmission method, transmittance, extinction and dust concentration are monitored at the same time;
In-situ installation. Measure rapidly and high precisely in viscous dust and high temperature;
High effect reflecting material technology, high detecting sensitivity and measuring stability;
Modularize designed. Each function part is displaced easily and maintained conveniently;

Perché Misuratore di opacità LDM-100 Si distingue

Domande frequenti

Sblocca l'analisi di precisione con Misuratore di opacità LDM-100

Sei pronto a migliorare le tue operazioni con soluzioni di analisi online leader del settore? Contattaci per ricevere assistenza da parte di esperti, informazioni sui prezzi o una demo personalizzata.

Prodotti correlati

Analizzatore di gas a conducibilità termica GRD-2000

Rilevatore di gas serie GT (rilevamento perdite)

Spettrometro di massa industriale online ProMars-6000

RLGD-100 Rilevatore laser remoto CH4