The BPM-200 PM2.5 monitor measures PM2.5 using well-established beta-ray attenuation technology.
Particulate matter sample is pulled by a vacuum pump and concentrated on filter tape spot, the concentrated sampleis advanced to measuring position where between beta raysource and detector. An attenuation signal of beta ray is detected which represents the mass of sample particulate.Particulate concentration can be determined by dividing mass to volume which has been strictly controlled during sampling with fixed flow rate.
| Principio | Beta ray attenuation |
|---|---|
| Risoluzione | 0.1μg/m³ |
| Limite inferiore rilevabile | 1μg/m³ |
| Precisione | ≤2% |
| Gamma | (0~1)mg/m³(Selectable) |
| Portata del campione | 16,7L/min |
| Display | LCD |
| Precisione del flusso | ±1%F.S |
| Flow Stability | ≤±2%/24h(Optional) |
| Calibration Film Reproducibility | ≤±2% |
| Sample Cycle | 60min(Optional) |
| Source | C14 source, active 10μCi, exemption source |
| Filter Paper Tape | Glass fiber |
| Roll Length | >20meters |
| Rivelatore | PMT |
| Uscita | RS232, RS485, Ethernet |
| Trasmissione dati | 2 analog (0~5)V; 2 channel analog (4~20)mA; 12 digital input/output; 4-way relay output; |
| Alimentazione | (220±22)V AC, (50±1)Hz |
| Temperatura di esercizio | (0~40)℃ |
| Ambient Humidity | 0~95%RH (senza condensa) |
| Ambient Pressure | 86~116kPa |
| Dimensioni | 310(H)×430(W)×400(D)mm |
| Peso | ≈25kg, without accessories |
Sei pronto a migliorare le tue operazioni con soluzioni di analisi online leader del settore? Contattaci per ricevere assistenza da parte di esperti, informazioni sui prezzi o una demo personalizzata.