- +86 571 8501 2111
- fpi-online@fpi-inc.com
- 中国浙江省杭州市濱江区銭墨路459号
コンテンツにスキップ 
The integrated electromagnetic flow velocity sensor combines an electromagnetic flowmeter and a radar level meter into a single unit. It can be directly installed inside drainage pipes to measure instantaneous flow velocity, instantaneous flow rate, cumulative flow, water level, and other parameters of stormwater and sewage in real time. The product allows setting flow velocity models tailored to different site conditions, enabling accurate calculation of flow velocity and volume within the pipes. Additionally, it features an IP68 protection rating, resistance to salt spray corrosion, and flood immersion durability, making it suitable for various harsh operating environments.
The flow velocity is measured using the reflection characteristics of radar signals. The instrument emits pulsed radio waves and receives signals reflected by particles within the fluid, such as bubbles and suspended solids. According to the Doppler effect, when particles move in the same direction as the fluid flow, the frequency of the reflected signal increases; when particles move in the opposite direction, the frequency decreases. By measuring these frequency shifts, the radar flow velocity meter calculates the fluid’s velocity.
| 製品モデル | BWATER-3200（Integrated radio wave velocimeter） | BWATER-3000（Radio wave velocimeter） |
| 測定パラメータ | Water level, flow rate, flow | velocity of flow |
| 速度測定範囲 | 0.1m/s~5m/s | 0.1m/s~5m/s |
| Velocity measurement and resolution | 1mm/s | 1mm/s |
| speed measurement accuracy | ±1%FS | ±1%FS |
| 測定範囲 | （0.2~10）m | （0.1~5）m |
| 距離分解能 | 1mm | / |
| 測距精度 | ±5mm | / |
| Flow velocity direction | Automatic detection and identification of the direction of water flow | Automatic detection and identification of the direction of water flow |
| Pitch compensation | 30°~60° automatic recognition and compensation | 30°~60° automatic recognition and compensation |
| Horizontal angle compensation | ± Manually enter compensation within 15° | ± Manually enter compensation within 15° |
| Average flow rate over time | It can be set within 30s~300s | It can be set within 30s~300s |
| Overcurrent area model | Standard round pipe overflow area model Custom overflow area model | / |
| インターフェース | 1チャンネルRS485 | 1channelRS485，1channel (4~20)mAinput |
| 通信プロトコル | MODBUS-RTU protocol | MODBUS-RTU protocol |
| 電源 | （7~30）VDC | （7~30）VDC |
| 平均消費電力 | ＜1W | ≤0.5W |
| 動作温度 | -25℃~65℃ | -25℃~65℃ |
| 保護レベル | IP68、塩水噴霧腐食耐性 | IP68、塩水噴霧腐食耐性 |
| 素材 | アルミ合金スプレー成形シェル、PTFEレドームシェル | アルミ合金スプレー成形シェル、PTFEレドームシェル |
| 寸法 | （165*96*93）mm | （96*96*32）mm |
業界をリードするオンライン分析ソリューションで業務を強化する準備はできていますか？専門家のガイダンス、価格、またはカスタマイズされたデモについては、お問い合わせください。.
今すぐお問い合わせください
以下のフォームにご記入ください。折り返しご連絡いたします。.
